This is a slower drying automotive enamel with very good flow and gloss,
excellent metal protection and adhesion to most surfaces.
PRODUCT AND ADDITIVES
‰ۢ Concept Auto Enamel
‰ۢ Concept Enamel Thinner
‰ۢ Concept Enamel Primer
‰ۢ Concept Zinc Phosphate Primer
‰ۢ Concept 1K Etch Primer
‰ۢ Concept Universal 4000 Primer
‰ۢ Sound Enamel surfaces.
‰ۢ Up to 20% reduction with Concept Enamel Thinner may be required.
SPRAY GUN AND PRESSURE
SPRAY GUN &
‰ۢ 1.2 ‰ÛÒ 2.0 mm gravity or suction
‰ۢ Pressure at 300 ‰ÛÒ 400 kPa
(Gravity feed is slightly higher
TECHNICAL DATA SHEET
Auto Enamel Page 2 of 2
‰ۢ All surfaces must be thoroughly sanded and cleaned with Concept Wax &
Grease Remover prior to application.
‰ۢ Apply two to three even coats. Avoid heavy wet coats.
‰ۢ 17 ‰ÛÒ 19 seconds B4 cup at
FLASH-OFF TIME: ‰ۢ 5 minutes between coats at
DRYING: ‰ۢ 16 ‰ÛÒ 24 hours at 25å¡C for a
Dry Film Thickness of 40 ‰ÛÒ