How to use Raptor liner Download

Applying Raptor Liner is a great way to protect surfaces and achieve a rugged finish. Here’s a concise summary of the process:

1. Preparation: Clean the surface thoroughly to remove dirt, grease, and contaminants. Sand the area with coarse-grit sandpaper (e.g., 120 grit) to create a rough texture for better adhesion.
2. Masking: Tape off areas you don’t want to coat to ensure clean edges and prevent overspray.
3. Mixing: Combine the Raptor Liner with the hardener according to the manufacturer’s instructions. Shake the mixture well to ensure uniformity.
4. Application: Use a spray gun to apply the liner evenly. Start with hard-to-reach areas, then move to flat surfaces. Maintain a consistent spray distance and pressure (e.g., 40-60 psi) for optimal results.
5. Layering: Apply one or two coats, depending on the desired thickness and texture. Allow each coat to dry before applying the next.
6. Curing: Let the liner cure as per the product’s instructions, avoiding moisture or handling during this period.